ATMOS Mission3 White Silver, horlogeweergave

ATMOS Mission3

White Silver
€449,00
Skip to product information
ATMOS Mission3 White Silver, horlogeweergave
1/12

ATMOS Mission3

€449,00
Taxes included. Shipping calculated at checkout.

A clear AMOLED display, three-button control and eight dive modes. Connect MISSION3 to the free ATMOS App for your dive logs and everyday activities.

Colour

Manuals and support · Questions before ordering?

  • Water rated Water rated to 130 m (EN13319)
  • 1.4-inch 1.4-inch full-color AMOLED, 454 x 454 pixels
  • 83 g 83 g with silicone strap
  • Scuba, Scuba, freedive and apnea training in one computer
  • GPS GPS navigation to your dive spot
  • Up to Up to 12 days battery as a watch, 14 hours diving

In the box

  • MISSION3 dive computer
  • Silicone strap 26 mm (135 to 230 mm)
  • USB-C charging cable
  • 2 × Screen protectors
  • Quick start guide with warranty card
  • 2 × Strap pins

MISSION3

Built for your next dive

Use MISSION3 for scuba, freediving and apnea training, then keep wearing it between dives. Review your logs in the ATMOS App, explore dive sites and stay connected with supported smartphone notifications.

Choose your colour above, or explore the dive modes, app and technical specifications below.

Display

Bright 1.4-inch full-color AMOLED

Big digits and a bright, high-contrast display that stays readable on the way down.

  • 1.4-inch full-color AMOLED
  • 454 x 454 pixels
  • MICA glass lens, 8H hardness
ATMOS MISSION3 display glowing in the dark

Built to go deep

130 m water rating (EN13319)

Fibre-reinforced polymer case with stainless steel 316L bezel and buttons, MICA glass and a quick-release silicone strap.

  • 130 m water rating (EN13319)
  • 83 g with silicone strap
  • 50.0 x 50.0 x 14.8 mm
  • Stainless steel 316L bezel and buttons
Freediver checking the ATMOS MISSION3 just below the surface

Dive modes

One computer, every dive

Air, Nitrox, Multi-Gas and Gauge for scuba, plus dedicated freedive, pool and apnea training modes.

  • Air, Nitrox, Multi-Gas (2 gases, O2 up to 50%), Gauge
  • Bühlmann ZHL-16c, gradient factors configurable
  • Freedive, Pool, STA, CO2 and O2 tables, dynamic training
  • Reset residual tissue loading
Two ATMOS MISSION3 dive computers under water

Alarms

Hear, see and feel the alarms

Visual, vibration and audible alarms help you notice important notifications underwater.

  • Visual alerts on the display
  • Vibration
  • Audible buzzer
Close-up of a freediver's wrist with the ATMOS MISSION3 under water

GPS and navigation

Navigate to your dive spot

Save entry and exit positions and navigate to stored dive spots at the surface. Use the 3-axis digital compass underwater.

  • Save entry and exit GPS
  • Add dive spots
  • Dive spot navigation
  • 3-axis dive compass with lock heading

GPS works at the surface only, not underwater.

ATMOS MISSION3 showing the dive site Shark's Cove on the GPS screen

Freediving

Freediving and apnea

Dedicated depth, pool and training modes with configurable freedive alerts and a safety stopwatch.

  • Depth and pool modes
  • STA, CO2 and O2 tables, custom tables, dynamic training
  • Freedive alerts: dive time, descent and ascent depth, freefall, keep depth, surface time, hydration
  • Freedive safety stopwatch
Freediver preparing at the surface with the ATMOS MISSION3 on the wrist

ATMOS App

The ATMOS App

Sync scuba and freediving logs over Bluetooth, review dive profiles, manage dive sites and configure selected MISSION3 settings from your phone.

  • Detailed digital dive logbook
  • Dive sites with surface GPS positions
  • Watch faces, freediving alerts and custom tables
  • UDDF export, free for iPhone and Android
Discover the ATMOS App
ATMOS MISSION3 white with a photo watch face of a clownfish

Daily smart features

Every day, not just dive days

Smart notifications, weather, tide tables, activity tracking and custom watchfaces.

  • Smart notifications (iPhone and Android)
  • Weather and tide tables
  • Step counter, calories, sleep tracking
  • Custom watchface, alarm clock, stopwatch, timer, sunrise and sunset

Smart notifications, weather and tides need the ATMOS App on a paired phone; behaviour depends on phone settings and permissions.

Man swimming under water in a shirt wearing the ATMOS MISSION3

Dive modes

Eight modes, one computer

AirSingle gas, air

Standard scuba mode for diving on air, with Bühlmann ZHL-16c decompression model and configurable gradient factors.

NitroxSingle gas, enriched air

Scuba mode for nitrox with adjustable oxygen percentage.

Multi-GasTwo gases, O2 up to 50%

Switch between two gases during the dive: air or nitrox with an oxygen percentage up to 50%.

GaugeDepth and time only

Bottom timer mode showing depth and time without decompression calculation.

FreediveDepth mode for freediving

Freedive depth mode with alerts for dive time, descent and ascent depth (10 sets each), freefall, keep depth, surface time and hydration.

PoolStatic and dynamic pool training

Pool mode for static apnea (STA) and dynamic training.

Apnea TrainingCO2 and O2 tables

Training tables for CO2 and O2 tolerance, plus custom tables.

Freedive Safety StopwatchSurface safety timer

Stopwatch to time surface intervals and safety protocols during freedive sessions.

THE ATMOS APP

The dive ends. Your story continues.

Connect MISSION3 to the free ATMOS App for iPhone and Android. Keep your dive logs, favourite places and supported daily statistics together on your phone.

ATMOS App scuba dive profile with depth, time, gas and SAC information

Your dive, in detail

Review dive profiles, recorded events and dive details in your digital logbook.

ATMOS App dive-site form with GPS coordinates and map

Remember where you dived

Manage dive sites and view supported surface GPS locations on a map.

ATMOS App summary with dive totals, recent activities and health statistics

See the bigger picture

Review recent activities and dive statistics, plus supported daily activity data.

Explore the ATMOS App

Features depend on the paired model, firmware, phone and permissions. GPS positions are recorded at the surface.

Specifications

Technical specifications

Case and display
Display type 1.4-inch full-color AMOLED
Display resolution 454 x 454 pixels
Lens material MICA glass (8H)
Bezel and button material Stainless steel 316L
Watch band Silicone, 26 mm width, quick release
Dimensions and weight
Water rating 130 m (EN13319)
Size 50.0 x 50.0 x 14.8 mm
Weight 83 g (with silicone watch band)
Battery and charging
Battery life Watch mode up to 12 days, dive mode up to 14 hours
Charging USB Type-C
Memory 1000 dive logs
Scuba diving
Single gas modes Air, Nitrox, Gauge
Multi-gas 2 gases, air or nitrox with O2 up to 50%
Decompression model Bühlmann ZHL-16c, gradient factors configurable
Alarm methods Visual, vibration and audible buzzer
Dive compass 3-axis with lock heading
Dive stopwatch Yes
Reset residual tissue loading Yes
Freediving
Freedive modes Depth, Pool, STA, CO2 and O2 tables, custom table, dynamic training
Freedive alerts and alarms Dive time, descent depth and ascent depth (10 sets each), freefall, keep depth, surface time, hydration
Freedive safety stopwatch Yes
GPS and navigation
Dive GPS Save entry and exit GPS, add dive spot, dive spot navigation
Smart features
Custom watchface Yes
Smart notifications Yes, most common iPhone and Android phones
Timekeeping tools Alarm clock, stopwatch, timer
Sunrise and sunset times Yes
Weather Yes
Tide tables Yes
Activity tracking Step counter, calories burned, sleep tracking (sleep time and quality)
Digital dive logbook Yes, via the ATMOS App
Device languages EN, KO, JA, ZH-CN, ZH-TW

Source: ATMOS MISSION3 specification sheet. Specifications may change with firmware updates.

Support

Frequently asked questions

Does the GPS work underwater?

No. GPS signals do not travel through water. The Mission3 records your entry and exit points at the surface and lets you navigate to a dive spot at the surface. Underwater you navigate with the 3-axis compass.

Which gases does the Mission3 support?

Air, nitrox and multi-gas with two gases (air or nitrox with an oxygen percentage up to 50%), plus a gauge mode.

Which decompression model does the Mission3 use?

Bühlmann ZHL-16c with configurable gradient factors.

How long does the battery last?

Up to 12 days in watch mode and up to 14 hours in dive mode, according to the ATMOS specifications. Charging is via the USB-C cable.

Which languages does the Mission3 display?

The device menus are available in English, Korean, Japanese and Chinese (simplified and traditional). Dutch, French and German are not available on the device. The ATMOS App is available in English and several other languages; Dutch is not listed. Support from Aqua Star Network is available in English and Dutch. TODO - BEVESTIGING NODIG: support languages.

How deep can I dive with the Mission3?

The Mission3 is water rated to 130 metres according to EN13319.

Order online

Shipped from the Netherlands at the official retail price, with European warranty and service.

Order the Mission3

You may also like